Hydraulic spot repair press_YIWU MINE SUPPLIES TRADING FIRM

1.YMS hydraulic spot vulcanizing repair machine, also known as C-clamp spot repair vulcanizer ,is an electric heating repair equipment for conveyor belt .
2.During transportation, the surface of the belt may be damaged or pierced by the conveying material.
3.Then the spot vulcanizing repair machine can be used to fix it .
4.The machine consists of frame, two heating plates, an integrated hydraulic lifter and an electric control box.
5.The frame is made of high-strength aluminum alloy, it's small size, portable,safe and reliable.
6.This machine is mainly applied to repair less than 300 * 300 dot damage.

Application method：
1. Transfer the machine to the repair site.
2. Fill glue on the damaged areas that need to be repaired (see the adhesive part in the vulcanization process of the belt joints, or the demonstration by our staff when the equipment is being tested).
3. Place the frame under the belt and align it with the damaged area.
4. Place the down heating plate just below the damaged area of the belt and then place the upper frame.
5. Press the hydraulic lever until it reaches enough pressure level.
6. Get the first power wire well connected to the electrical control box. Connect the second wire with the electric control box and the upper and down plates.
Note that it corresponds to the sign on the electric control box.
7. Turn on the electric control box and start the vulcanizing repair process.

Model	Temperature(°C)	Power(kw)	Dimensions(LWH mm)	Weight(kg)	Pressure(Mpa)
YMS-200X200	145	1.1	1300200780	145	≤2.0Mpa
YMS-250X250		1.4	1300250780	149
YMS-300X300		1.6	1300300780	152
YMS-350X350		1.9	1300350780	1163