C Clamp Repair Press_YIWU MINE SUPPLIES TRADING FIRM

User Installation instructions：

Fill glue in the damaged areas that need to be repaired(see the adhesive part in the vulcanization process of the belt joints, or the demonstration by our staff when the equipment is being tested);

Put the bottom plate, water pressure plate and lower heating plate under the damaged areas of the belt according to the structural diagram.

Put the upper heating plate,Insulation board on the damaged areas of the belt.Align the top and bottom plates.

Locked equidistantly then tighten the bolts.

Get the first power wire well connected to electric control box. Connect the second wire with electric control box and the upper and down plates.Note that it corresponds to the sign on the electric control box.

Connect the end of the high pressure pipe with inlet opening of water pressure plate. And connect another end of the high-pressure pipe with water output hole of water pump.Switch on, add pressure upon vulcanizing machine.

The equipment can be customized as two type: oil pressure and water pressure.